Our bolt on under the cab shock mounts are the ultimate package to maximize rear suspension peformance while keeping your suspension out of the cab. After removal of the factory stamped shock cross member, our fabricated mounts utilize factory holes for location. Only 2 holes total need to be drilled. Designed to run either gen 1 or gen 2 raptor oem or aftermarket shocks.
OEM gen 1 shocks are a 2.5" body with 11.5" of shaft and the gen 2 shocks are 3" body with a 12" shaft. If you are looking for more ground clearance we recommend the first gen shocks as they have a shorter collapsed length thus moving the lower shock mount further up. NOTE: if you are running an oem shock, the valving will be very stiff and needs to be revalved. Please contact us about our shock service.
- CAD designed and desert tested
- 100% bolt on
- .188" thick steel construction
- MIG welded
- 4130 cross bar
- Utilizes factory swaybar mount on axle for lower shock mount which allows 4" more ground clearance than factory
- 3 different options for shocks.
- 14" of wheel travel with oem Raptor rear shocks ( slightly more with after market raptor spec shocks)
- Multi layer powdercoat or raw
- Comes with grade 8 hardware
- SHOCKS NOT INCLUDED!
- FOR OFFROAD USE ONLY!
- 2-3 week lead time upon order date